Field conditions

Plant for soft ground

Working heavy plant on soft, wet or low-strength ground: low-ground-pressure machines, matting, access tracks and recovery planning.

Soft ground bogs machines, damages access tracks, slows production and creates tip-over risk. It is common on floodplains, coastal clays, reclaimed land and any site after heavy rain. The right plant and access strategy keeps work moving and people safe.

About this guide

Editorial planning guidance with illustrative scenarios. No independent professional review is claimed. Read the authorship and evidence policy or report a correction.

Identify soft ground early

Geotechnical investigation, local knowledge and simple tests such as a dynamic cone penetrometer can show where ground will not support heavy plant. Watch for high water tables, organic soils, soft clays and areas with a history of flooding.

Choose low-ground-pressure plant

Wide tracks, swamp or LGP dozers, long-track excavators and articulated dump trucks spread load and handle soft conditions better than standard machines. Smaller machines may work where larger ones would sink. Ask suppliers for ground pressure figures and LGP options.

  • LGP or swamp-track dozers
  • Wide-track or amphibious excavators
  • Articulated dump trucks instead of rigid trucks
  • Tracked carriers for material movement

Build access and working platforms

Temporary access tracks built from rock, geotextile and granular fill, or timber and composite mats, protect the ground and keep plant moving. For cranes and piling rigs, engineered platforms are often required.

Plan recovery

Machines will occasionally bog. Have a recovery plan that uses suitable recovery points, rated equipment and a competent person in charge. Improper recovery using chains or unrated gear is dangerous. Ask suppliers about their recovery capability and equipment.

Comparing ground pressure

Ground pressure is the weight of the machine spread over the contact area of its tracks or tyres. Low-ground-pressure (LGP) and swamp dozers use wider tracks to bring pressure down to around 20–35 kPa, compared with around 50–70 kPa for a standard D6-class dozer. Excavators fitted with wider track shoes also reduce ground pressure. Wheeled machines generally have much higher contact pressure than tracked machines, which is why ADTs and loaders can struggle on very soft ground even though they are excellent on moderate conditions.

Matching machine ground pressure to the ground's capacity avoids bogging and preserves the working surface. Ask suppliers for the ground pressure of the exact machine and shoe width offered.

Approximate ground pressure of common plant
MachineApproximate ground pressure
Swamp or LGP dozer20–35 kPa
Standard D6-class dozer50–70 kPa
20 t excavator, standard shoes40–50 kPa
20 t excavator, wide shoes30–40 kPa
Loaded 30 t ADT (per tyre footprint)Well above tracked plant; depends on tyre and inflation
Figures vary with model, shoe width and attachments. Ask the supplier for the specific machine's ground pressure.

Where soft ground is common in Australia

Soft ground is common on coastal floodplains along the eastern seaboard, including estuarine clays around the Hunter, Richmond, Clarence and Brisbane river systems; reclaimed land around ports; the Murray–Darling floodplains; black soil plains of western NSW and southern Queensland after rain; and tropical areas during the wet season. Acid sulfate soils in some coastal areas add environmental controls when excavated.

Black soils (reactive clays) can be firm when dry and almost untrafficable when wet, so the same site may need very different plant at different times of year.

Access solutions and costs

Temporary access options include geotextile and crushed rock tracks, bridging layers, timber or composite matting, and stabilised haul roads using lime or cement. Composite mats can be hired and reused. For short-term access to a single point, mats are often faster. For long-term haul roads, a well-drained granular road usually costs less over the life of the project.

Recovery equipment such as rated snatch blocks, soft shackles and winch lines should be available, and recovery should be supervised by a competent person. Never use makeshift chains or unrated equipment to pull a bogged machine.

What it means for the hire agreement

Soft ground creates commercial risk through bogging, recovery and lost production. Agree who pays for recovery if a machine becomes bogged, and whether time spent building access or waiting for ground to dry is charged as standby. Temporary access tracks and matting can be priced as a separate item so they are not forgotten.

If low-ground-pressure machines carry a higher rate, compare that against the likely cost of delays with standard plant. On wet, low-lying sites the specialised machine is often the cheaper option overall.

Common mistakes

Sending standard plant onto obviously soft ground and hoping for the best often ends with bogged machines and damaged access. Another mistake is recovering bogged plant with improvised gear, which is dangerous.

Plan access, choose suitable plant, and have a recovery plan ready before work starts.

Questions to ask suppliers

Before booking plant for soft ground, ask:

  • What is the ground pressure of the proposed machines?
  • Do you have LGP or wide-track options?
  • Can you supply matting or build access tracks?
  • What recovery equipment and procedures do you have?

Planning for seasonal change

Ground that is firm in a dry spring may become untrafficable after summer storms or winter rain. Schedule the softest work for the driest part of the year where possible, and keep a contingency plan — alternative plant, matting or access routes — ready if conditions change.

Illustrative scenario: a coastal floodplain subdivision

A subdivision on a coastal floodplain in northern NSW sits on soft estuarine clay with a high water table. The first plan to use standard ADTs and a 30-tonne excavator fails in the first wet week, when two trucks bog on the haul road.

The contractor switches to LGP dozers and a wide-track excavator for the soft areas, builds a geotextile-and-rock haul road, and uses composite matting for short-term access. Recovery equipment and a competent person are available on site. Productivity improves because machines stay moving instead of waiting to be recovered.

Sample supplier brief

A short written brief gets faster, more comparable quotes. Adapt this example to your job:

“We need earthworks plant for a subdivision on soft estuarine clay with a high water table near Ballina, NSW. Ground investigation indicates very soft to soft clay in the upper 1.5 m. We plan geotextile-and-rock haul roads.”

“Please propose low-ground-pressure dozers, a wide-track excavator and suitable haul units, state each machine's ground pressure, and confirm whether you can supply matting and recovery equipment. Include wet-weather standby terms.”

Common questions

What is an LGP dozer?

A low-ground-pressure dozer has wider tracks that spread the machine's weight, reducing the chance of sinking in soft ground.

Are articulated or rigid trucks better on soft ground?

Articulated dump trucks generally cope much better with soft, uneven or wet ground because of their all-wheel drive and articulation.

What is geotextile used for on soft ground?

It separates soft subgrade from the rock or gravel above, preventing mixing and helping the access track spread load.

Can lime stabilisation help on soft clay?

Lime can dry and strengthen some clays, improving trafficability. Suitability depends on the soil and should be tested.

Field note

This guide is general information to help you prepare a better enquiry. It is not engineering, legal or safety advice. Equipment selection, engineering and safe systems of work remain the responsibility of competent project and supplier teams, and regulatory requirements differ between states and sites.

Keep planning

Related guides

See all field conditions guides